MOTOMUCK WHEELMUCK BRAKE CLEANER – 750ML

Wheels can get dirty relatively fast with a build up of brake dust. We have specifically created a NO EFFORT product that removes brake dust effortlessly called Wheelmuck+. The formula is fast acting and has been specially formulated at a viscosity to allow easy application and to enable it to be very cost effective.

Wheelmuck+ is also PH neutral which makes it safe to use on all wheels and painted surfaces. Wheelmuck+ is a little smelly, but rest assured that component is 100% biodegradable.

When using Wheelmuck+, you’ll see it undergoes a colour change from yellow to red as a reaction occurs to dislodge the brake dust iron contaminants, enabling it to be washed away with water.

Features

• NZ made
• Completely different technology to regular wheel cleaners
• PH Neutral- Safe on wheels and painted surfaces
• Active is 100% Biodegradable
• Low Odour
• Low Foaming
• 2-3 x more wheel washes than similar imported products due to WHEELMUCK+ allowing a very thin application and still working extremely well- very cost effective.
• Easy application due to viscosity.
• Better coverage due to viscosity and anti foaming properties.
• Colour coding during stages of reaction with contaminants.
• Can be used for decontamination of vehicle body panels.

Application
Note before: It is recommended to only do one or two wheels at a time. For ceramic pad dust, dirt, grease or tyre silicone overspray a slight agitation with a soft brush is necessary.

Step one
Adjust nozzle on applicator to a fine spray position.
Spray evenly on cool, dry wheels.

Step two
Leave on for 2-3 minutes. Wheelmuck+ changes from yellow to red to purple as reaction occurs.
If any areas have dried and turned brown, do a quick recoat to those areas just prior to rinsing off.

Step three
Rinse off with a jet of water from hose or pressure washer.
Reapply and agitate with soft brush if necessary.

Colour Coding

• Sprays on YELLOW, if no change then no brake dust contaminants, or possibly ceramic pad dust.
• Turns RED as reaction starts.
• Turns PURPLE when reaction well underway.
• Turns DARK PURPLE when reaction is almost complete. Rinse off just before next step.
• If it turns BROWN, reaction has started reversing. A quick spray on BROWN spots with WHEELMUCK+ before rinsing off will sort this.

Caution

• Tarnishing will occur on older corroded clips and older style wheel balancing weights.
• Oxidation can occur on Zinc, Cadmium plated or other specific raw surfaces.
• Don’t use on rims that are old, bad condition or damaged.
• Oxidation stains can occur on driveways. To clean, simply hose off after application. However stain will disappear in a couple weeks regardless.